Why does my foot bath leak water?

A leak from a foot bath should be treated carefully, because water and electricity should never come into contact. If you see dripping, pooling or moisture around the base, stop using the appliance straight away, unplug it and dry the area before checking anything else.

Find the likely source

1. Inspect the outer casing, seam lines and any visible drain or fill area for cracks or displaced parts.
2. Check whether the unit was filled above the marked level, because overfilling can force water out during use.
3. Make sure the bath is sitting flat and not rocking, as a tilted unit can spill water at one side.

Expected result: if the leak was caused by overfilling or poor placement, correcting this should prevent further dripping. If water still escapes, do not continue testing.

Check simple user-related causes

1. Confirm that any plugs, covers or removable parts are fitted as described in the instructions.
2. Empty the bath after use and dry it thoroughly before storage, because trapped water can later appear as a leak.
3. Look for hairline cracks, worn seals or damage around the underside.

Expected result: the appliance should stay dry during a short, monitored test. If it does not, stop using it.

When to stop using it

Do not reuse a leaking foot bath. Keep it unplugged and contact the retailer or store where it was purchased so they can explain the next steps.