Why is the water in my foot bath splashing out?

Water splashing out of a foot bath usually means the bath is overfilled, the feet are moving too vigorously or the appliance is not set on a level surface. Splashing onto the selector switch is specifically something to avoid, because it can affect safe operation.

How to check it

1. Switch the appliance off and unplug it before adjusting the water.
2. Reduce the water to the recommended level if it is above the fill mark.
3. Place the bath on a flat, stable floor rather than a soft or uneven surface.
4. Sit down before placing your feet in the bath and avoid standing in it.

If the splashing reduces after lowering the water level and keeping the bath still, the problem was likely caused by setup rather than a fault. If water still escapes easily, the unit may be incorrectly positioned or damaged.

Stop using it if

Stop using the foot bath if water reaches the controls, the unit tips, or the cable or plug becomes wet. Do not keep testing an electrical appliance that is splashing toward live parts.

What next

1. Dry the exterior thoroughly.
2. Repeat the test with less water and gentler movement.
3. If splashing continues or safe use is uncertain, contact the retailer or store where you bought it.