Why does my night light switch on and off by itself?

If the night light appears to switch on and off without being touched, the sensor may be reacting to changing room light, or the plug connection may be unstable. This is usually simple to check, but any sign of electrical fault means the product should be stopped immediately.

Observe the light pattern

1. Watch the light for a full minute in a steady room.
2. What to observe: if it changes state when another lamp is turned on or off, the sensor is likely responding normally.
3. If it cycles at random in steady light, continue with the next steps.

Check the socket fit

1. Unplug the unit and plug it back in firmly.
2. What to observe: if the behaviour stops after reseating, the original connection may have been loose.
3. Do not use an adapter or extension that makes the fit worse.

Look for signs of a fault

1. Inspect for flicker, crackling, overheating, odour, damage or moisture.
2. What to observe: any of these point to a potential safety issue.
3. Stop using the unit at once if you see or smell anything unusual.

When to stop using it

Stop using the night light if it flickers uncontrollably, overheats, smells burnt, or the plug or casing is damaged. If the issue remains unresolved or safe use is uncertain, contact the retailer or store where the product was purchased. The supplied products include sensor-based and non-sensor variants, all mains powered with a flat plug and Class II construction.