Why does my iron trip the power or not stay on when I switch it on?

If the iron trips the power or will not stay on, treat it as a possible electrical fault first. Do not keep retrying it if the plug, lead, socket or body shows damage, or if the iron smells hot or behaves unpredictably. Stop using it immediately in those cases.

Rule out a supply problem

1. Unplug the iron and inspect the mains plug, cable and flex for cuts, kinks or heat damage.
2. Try a different socket with another appliance you know works.
3. If the socket trips with several appliances, the issue is likely with the household supply, not the iron.

Expected result: the iron should power up normally without tripping the circuit. If it only fails on one socket, that points to a socket fault. If it trips several sockets or the lead looks damaged, stop using the product.

Check for overheating or internal fault signs

1. Let the iron cool, then inspect the soleplate and body for unusual marks, loose parts or distortion.
2. Confirm the thermostat is set correctly and the iron is not left on a very high setting for an extended period.
3. Test again only once the iron is fully cool and dry.

If the problem continues, do not open the product or attempt repair. Stop using it and contact the retailer or store where it was purchased, who can explain the available next steps.