Why does my waffle maker trip the power when I turn it on?

If the appliance trips the power, treat it as a safety issue and stop using it straight away. Do not keep resetting the supply or trying repeated starts, because a fault in the heater, cord or socket may be involved.

What to check

1. Unplug the waffle maker and inspect the plug, cord and housing for visible damage, scorch marks or moisture. If you find any of these, do not use the appliance again.
2. Try a different wall socket that is known to work, but only after the appliance has dried fully and has been checked for obvious damage. A faulty socket can also cause tripping.
3. Make sure the appliance is not connected to an overloaded extension lead or shared outlet. Too much load on one circuit can cause the supply to trip.
4. If the power trips again immediately, stop testing. Repeated tripping suggests an electrical fault that should not be ignored.

Expected result

The waffle maker should power up without causing the fuse or circuit breaker to trip.

When to stop using it

Stop using the waffle maker at once if it trips the power more than once, if the cord or plug feels hot, or if there is any smell of burning. Contact the retailer or store where it was purchased for the next steps.

Helpful prevention

• Use only a suitable wall socket.
• Keep the cord untwisted and undamaged.
• Never use the appliance with visible moisture on the plug or base.