Why does my sandwich maker keep tripping the power?

If the sandwich maker trips the power, stop using it straight away and check the socket, cord and appliance condition before trying again. A trip can indicate an overload, moisture, a faulty socket or an internal electrical fault, so it should be treated carefully.

Checks to make safely

1. Unplug the appliance and inspect the plug, cord and outer casing for heat damage, cuts or loose parts. Expected result: you should not see any damage or smell burning.
2. Try the sandwich maker in a different wall socket only if the cord and appliance look safe. Expected result: if the original socket was the problem, the appliance may work normally elsewhere.
3. Make sure the appliance is dry and has not been cleaned with water entering the housing. Expected result: the unit should be completely dry before reuse.
4. Do not use an extension lead or overloaded socket. Expected result: the appliance should have a direct, stable power supply.

Why this matters

The product uses mains power, so a trip should never be ignored. If the breaker trips again in a second socket, or if the appliance makes a humming, buzzing or burning smell before switching off, stop using it immediately. That can mean the fault is inside the appliance and it is not safe to keep testing.

When to stop using it

Stop using the sandwich maker after any repeat trip, especially if the plug, cord or housing feels warm, damaged or wet. If the issue remains unresolved or safe use is uncertain, contact the retailer or store where it was purchased.