Why is my barbecue stand or table model wobbling?

A barbecue that wobbles should not be used until it is stable, especially when it runs on mains power and gets very hot. If the unit tilts, rocks, has bent legs or you can see damaged fixings, stop using it straight away. The product data shows that several models can be used as a stand barbecue or table model and include non-slip feet, so stability is an important part of safe operation.

1. Place the barbecue on a firm, level surface and check whether the wobble disappears. Expected result: the appliance should sit flat without rocking. If it still moves, stop using the product.
2. Check that all legs, shelves or stand parts are assembled exactly as intended and tightened where the supplied instructions require it. Expected result: the frame feels solid and does not flex. If any fixing is missing or damaged, do not use the barbecue.
3. Inspect the non-slip feet for wear, cracks or dirt that could prevent grip. Expected result: all feet make solid contact with the floor or table. If a foot is missing or broken, stop using the product.
4. Make sure the barbecue is not overloaded with food, tools or water on one side. Expected result: the unit stays balanced while in use. If the load is uneven, rearrange it before continuing.
5. If the barbecue cannot be made stable, unplug it and do not continue cooking. Contact the retailer or store where it was purchased.

To reduce future wobble, recheck the frame after transport, use only on level ground and do not move the barbecue while it is hot.