Why is my torch flickering when I move it?

If your torch flickers when it is moved, the battery connection, switch or internal contact may be intermittent. Do not shake or twist the torch repeatedly, and stop using it immediately if it gets hot, smells burnt or shows signs of battery damage.

1. Open the battery compartment and check that the batteries are firmly seated.

   Expected result: the torch should stop flickering if the batteries were moving inside the compartment.

2. Look for corrosion, dirt or a bent contact.

   Expected result: the contacts should appear clean and springy. A poor contact can break and remake connection as the torch moves.

3. Close the compartment fully and test the torch without knocking or squeezing it.

   Expected result: the light should stay steady. If it only works when the casing is pressed, the fault may be internal.

4. Try fresh batteries if the current set is old.

   Expected result: a better battery fit can remove flicker caused by weak contact under load.

5. Stop using the torch if flickering continues in a stable position.

   Expected result: the light should not cut in and out during normal handling. If the issue remains unresolved, or safe use is uncertain, contact the retailer or store where you bought it.

This is generic troubleshooting, as the supplied product data does not include a detailed torch construction guide. If movement still affects the light after these checks, the retailer can advise on the next steps.