Why does the cord on my crêpe maker not stay stored properly?

If the cord storage does not hold the lead neatly, the appliance is usually still usable, but the cord should never be left hanging loose or strained. Stop using the crêpe maker if the cord storage is broken, the cord jacket is damaged, or the lead shows signs of heat damage. These models include cord storage, and the manuals also warn against pulling the appliance by the cord or allowing loose cables to create a trip hazard.

1. Check the cord path

1. Unplug the appliance and let it cool.
2. Wind the cord as intended so it lies flat without twisting.

If the cord now stays in place, the storage slot was simply not being used correctly.

2. Look for blockage or debris

1. Check the cord storage area for crumbs, dust or packed residue.
2. Wipe it clean only when the appliance is fully unplugged and cool.

Debris can stop the cord from sitting properly.

3. Inspect the cord itself

1. Run your eyes along the cord length for cuts, flattening or exposed inner material.
2. Check whether the cord feels warm, stiff or cracked.

Any visible damage means the appliance should not be used again.

4. Stop if the cord will not secure safely

1. If the lead keeps slipping, snagging or hanging where someone could trip over it, stop using the appliance until it is safely arranged.
2. Do not tape, tie or modify the cord storage.

If the issue remains unresolved or safe use is uncertain, advise the consumer to contact the retailer or store where the product was purchased.