Why does my citrus juicer not fit back together after cleaning?

If the citrus juicer will not fit back together after cleaning, one of the detachable parts is probably misaligned, still damp, or not seated fully in its guide. The manual for the citrus juicer types in the data set emphasises dismantling for cleaning and refitting the parts in the correct order, so careful reassembly is the key check. fileciteturn0file3turn0file5

1. Check each part one by one

1. Unplug the appliance if you have not already done so.
2. Lay out the jug, cone, filter and lid in the order they were removed.
3. Look for trapped pulp, water or a part fitted the wrong way round.

If a part only fits when forced, do not force it.

2. Dry and align the components

1. Dry the parts thoroughly.
2. Match the cone and filter carefully with their holders.
3. Lower the lid straight down, without twisting it into position.

If the lid sits correctly after drying and alignment, the issue was likely residue or orientation.

3. Confirm the juicer is safe to use

1. Check that no moving part is scraping.
2. Make sure the jug and pulp collector are in place before use.
3. Run a brief test with one halved citrus fruit.

If the juicer still does not reassemble correctly, or if any locking part seems worn or broken, stop using it and contact the retailer or store where it was purchased.