How do I clean a dummy camera without damaging it?

A dummy camera only needs light cleaning, and gentle care will keep the housing looking realistic. Use dry, soft cleaning methods first, because moisture and strong detergents can mark or weaken the finish.

1. Remove loose dust first

1. Switch off the product if it has any light effect active.
2. Wipe the outside with a soft, dry cloth to remove dust and cobwebs.

If the surface looks clearer after this, no deeper cleaning is needed.

2. Clean stubborn marks carefully

1. If there is light grime, use a cloth that is only slightly damp with clean water.
2. Dry the unit straight away with a second soft cloth.

If marks remain after gentle wiping, do not use abrasive cleaners or tools.

3. Keep moisture away from the compartment and openings

1. Do not let water run into the battery compartment or fixings.
2. Do not spray cleaner directly onto the product.

If moisture enters the housing, remove the batteries only if it is safe to do so and allow the product to dry fully before reusing it.

4. Stop using it if cleaning reveals damage

Stop using the product if you find cracks, loose parts, corrosion or a battery leak. Do not open the housing or attempt internal cleaning. If the issue remains unresolved or safe use is uncertain, contact the retailer or store where the product was purchased. Product data: 10.016.07, 10.016.08, generic troubleshooting.