Why does my dummy camera look dim or not convincing enough at night?

If the dummy camera does not look convincing after dark, the most common causes are weak batteries, poor placement or too much surrounding light. Start with simple checks, because this product is meant to look like a camera, not record anything.

1. Check the power source

1. If you use the Smartwares dummy camera 10.016.07, fit fresh AA batteries and make sure they are inserted correctly.
2. Wait a moment after closing the compartment, then look at the unit in a darker room or at dusk.

If the light becomes more visible, the batteries were the main issue.

2. Improve the viewing angle

1. Mount or place the unit where the front is easy to see.
2. Avoid positions where the camera is turned into a wall, obscured by a beam or lost in bright daylight glare.

If the dummy camera is not obvious from the direction people approach, the visual effect is reduced.

3. Reduce visual clutter around it

1. Move nearby objects that cover the unit, such as boxes, plants or cables.
2. Keep the area around the housing neat so the product stands out.

This does not change the product itself, but it can make it much more noticeable.

4. Stop using it if the housing is loose or cracked

Stop using the product if it is damaged, unstable or shows battery leakage. Do not try to repair the casing. If the issue remains unresolved or safe use is uncertain, contact the retailer or store where the product was purchased. Product data: 10.016.07, generic troubleshooting.