Why is my solar light flashing instead of staying on?

If your solar light flashes or pulses, the battery may be weak, the panel may not be charging properly, or the light may be affected by moisture or unstable placement. A flashing light is usually a sign to check charging and installation before assuming a fault. fileciteturn0file5turn0file6

1. Place the light in a stable position in direct sunlight and confirm it is switched on. Expected result: a steady charge should reduce flashing after dark. fileciteturn0file5turn0file6
2. Clean the panel and check that no foliage, dirt or décor is blocking it. Expected result: if charging was interrupted, the flashing should lessen once the panel gets better daylight.
3. Inspect the housing for signs of rain ingress, loose parts or damage after strong weather. Expected result: if the casing is intact, the flashing is more likely to be caused by charging or battery condition. fileciteturn0file1turn0file6
4. If the model has a rechargeable battery, allow a complete charge cycle and test again on the next evening. Expected result: a healthy battery should support steadier operation. fileciteturn0file2turn0file5
5. Stop using the product if the flashing is accompanied by heat, smell, swelling, visible water entry or cracking. If the issue remains unresolved or safe use is uncertain, contact the retailer or store where the product was purchased. fileciteturn0file1turn0file6