DBY-21, DBY-22, DBY-23 - How to install a plug-in wireless doorbell

Parts which are included in the box.

The shape of the chime can be different per model, but the pairing procedure is the same.

Tools for mounting the plug-in doorbell.

How to start.

1. Remove the cap from the door push of the mounting plate. Do this by carefully by pressing the catch with a screwdriver in the recess at the bottom of the door push, so that the cap comes loose. Then place the supplied button cell type CR2032 in the battery holder with the plus on top.
2. Place the cap back on the mounting plate.
3. Plug in the receiver. A bell sound can then be heard.           In case you have an additional receiver, repeat this instruction.
4. Connect the door knob to the receiver by pressing the button within 20 seconds.

Remove the cap from the door push of the mounting plate. Do this by carefully by pressing the catch with a screwdriver in the recess at the bottom of the door knob, so that the cap comes loose.

1. Press the white small button on the inside of the doorknob. You will then hear the first melody.
2. By pressing the white button again you will hear the next melody etc.

How to mount the door push.

1. Mount at height of approximately 1.5 meters.
2. Make the chosen location free of grease and dry.

There are 2 ways to fix on the selected place:

3. Stick the supplied double-sided sticker on the back of the door push and stick it.

Connecting multiple door pushers or multiple receivers.

See ‘How to start’.

How to reset.

1. Remove the door knob cover from the mounting plate 

2. Remove the receiver from the wall socket and replace it after a few seconds.

3. Press the white button on the inside of the door knob. You will hear a sound and the doorbell will be disconnected from the receiver.

4. Connect the door bell to the receiver by pressing the button within 20 seconds. You will hear a sound and now they are linked again.

Adjust volume.