Why does the hose on my vacuum cleaner keep coming loose?

If the hose keeps detaching, the connection may not be seated fully, the locking tab may be worn, or the hose end may be damaged. Switch the vacuum cleaner off and unplug it before adjusting the hose. Stop using the appliance if the connection cracks, no longer holds firmly or exposes any electrical part.

1. Refit the hose properly

1. Remove the hose end and push it back into the socket firmly.
2. Turn or lock it if your model requires that action.
3. Check that it does not wobble when pulled gently.

Expected result: a correctly seated hose should stay attached during use.

2. Inspect the connection points

1. Look at both the hose end and the socket for dirt, distortion or wear.
2. Remove any debris that may stop a tight fit.
3. Check whether the hose end is split, bent or cracked.

Expected result: a clean, undamaged connection should grip more securely.

3. Test with light movement only

1. Move the cleaner gently to see whether the hose disconnects easily.
2. Do not pull the hose sharply or twist it beyond normal use.
3. Compare the behaviour after refitting the hose again.

Expected result: the hose should stay in place under ordinary handling.

4. Stop if it will not stay attached

1. If the hose keeps falling out, stop using the vacuum cleaner.
2. Do not tape the hose on or modify the fitting.
3. Contact the retailer or store where the product was purchased for the available next steps.

Keeping the hose free from twisting and avoiding hard pulls during cleaning will help the connection last longer. A loose hose can quickly reduce suction, so it is worth checking as soon as you notice it.